protherm

Resume - Nace 1 Coatings Inspector Misco Jobs | Go to Job Seeker's Center »» | «« previous resume Resume #51341 next resume »» CONTACT INFORMATION: View contact information... Name: Donald Rawson Date: 12-10-06 Highlights of my education: High School, NACE 1 Coatings Inspector,, Associated Builders and Contractors Advanced Coatings Course INS General Pipe Line Certificate Computer Experience Reports I am currently doing are on Excel. Basic knowledge of Word and Power Point. Programs that are available on my computer 1 MS Word 1 MS Excel 1 MS Outlook I do not have any problems traveling out of my local area? I do not have any problems traveling internationally? My current workload is (hours per week)? 70 My projected or forecasted workload (hours per week? 70 EQUIPMENT CATEGORIES I HAVE KNOWLEDGE OR EXPERIENCE IN Equipment Code General Category Equipment Category General Mechanical 1.01 X Boilers & Heaters 1.02 Castings / Forgings 1.03 X Heat Exchangers & Chillers 1.04 X Fittings & Flanges 1.05 X Fabricated Piping / Spools / Bends 1.06 X Pressure Vessels 1.07 X Structural Steel 1.08 X Tanks 1.09 Trayed Columns 1.10 X Valves 1.11 FRP/GRP Pipe and Vessels Coatings: Inside (ID) and Outside (OD) Corrosion and Other Protective Coatings 6.01 Three-layer Polys 6.02 X Coal Tar 6.03 Fusion Bonded Epoxy (FBE) 6.04 Foams 6.05 X Epoxy's 6.06 X Concretes 6.07 Spray Polyurethane Foam (SPF) 6.08 Phosphating 6.09 X Impact/Abrasion Coatings 6.10 X Fiberglass Expediting 8.01 X Desk Expediting 8.02 X Field Expediting 11.01 X Coordination 11.02 X Cost Control 11.03 X Document Control 11.04 X Engineering 11.05 X Estimating 11.06 X Logistics 11.07 X Materials Management 11.08 X Planning 11.09 X Procurement 11.10 X Scheduling 11.11 X Site Supervision Equipment Category: PROJECT CONTROLS: 11:01, 11:02, 11:03, 11:05, 11:06, 11:07, 11:08, 11:10, 11:11. Years of active experience with this Category: 25 Company Dates Details Details of training in this Category: Details of experience in hands-on performance of the manufacturing activities associated with this Category: Performance blasting and Coatings, Protherm Services. Precision Progressive Technical, Services, Cameron Iron works, Tipco, Applied Coatings 1979 to 2006 Site Superintendent and General Foreman in various chemical plants and refineries in charge of maintenance, hard dollar work capitol projects and turnarounds. Managed and inspected blast and paint operations on offshore platforms. Ordered all materials need for the complete job. Assembled and hydro tested blow out preventers and deep water risers for for Cameron iron works. Details of experience in performing surveillance activities associated with this Category: Performance blasting and Coatings, Protherm Services. Progressive Technical, Services, Tipco,Applied Coatings, Cameron Iron Works. 1979 to 2006 In the various management, supervisory and inspection position I have held over the years I have attended many pre- job meetings, interacted with plant managers, owners, representatives of facilities, safety personnel, subcontractors, vendors of products I have purchased pertaining to the projects, set up projects, accounts and offices in and out of town locations as well as offshore locations. List of national and international codes and standards I have applied in relation to this Category: Written, and followed many various specifications pertaining to specific projects utilizing standards and recommended practices as they related to the project. Actively involved in the estimation and execution of the projects. Expedited man-power and materials, managed subcontractors that assisted on the projects. Active member of NACE and SSPC with access to their web sights to download any recommended practices and standards as they pertain to any projects. List of purchasers and/or projects to which equipment in this Category was supplied to Customers include: United States Oil Petroleum, Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcor, Texaco, Motiva, Sun Diamond Offshore, Ensco, Noble, T.D.I., Signal, as well as vendors and suppliers all over the United States. List of current qualifications and/or certifications applicable to this Category: NACE 1 Coatings Inspector, NACE Bridge stamp, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE. Equipment Category: GENERAL MECHANICAL 1:01, 1:03, 1:04, 1:05, 1:06, 1:07, 1:08, 1:10 Years of active experience with this Category: 20 Company Dates Details Details of training in this Category: Details of experience in hands-on performance of the manufacturing activities associated with this Category: Performance blasting and Coatings, Protherm Services. Progressive Technical, Services, Tipco, Applied Coatings, Cameron Iron Works. 1979 to 2006 Site Superintendent, General Foreman and Foreman in various chemical plants and refineries in charge of maintenance, hard dollar work capitol projects and turnarounds. Assembled and hydro tested blow out preventers, and deep water riser pipes. For Cameron Iron Works. Details of experience in performing surveillance activities associated with this Category: Performance blasting and Coatings, Protherm Services. Progressive Technical, Services, Tipco, Plant painting and Maintenance 1979 to 2006 In the various supervisory positions that I have held. I have performed many functions in the mechanical fields. Assisted in the extraction and installation of exchangers as well. I have performed inspection blast on boiler tubes, inside pressure vessels, heaters, and towers utilizing various media material. I have rigged spiders and stages to many flare stacks, heaters, tanks, silos and offshore structures. I have also been responsible for my own general repair on all the equipment that is associated in the coatings industry. List of national and international codes and standards I have applied in relation to this Category: List of purchasers and/or projects to which equipment in this Category was supplied: Customers include: United States Oil Petroleum Reserve, Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcore, Texaco, Motiva, Sun Oil, Diamond Offshore, Ensco, Noble, T.D.I, as well as vendors and suppliers all over the United States. List of current qualifications and/or certifications applicable to this Category: NACE 1Coatings Inspector, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE. Equipment Category: THERMAL SPRAY APPLICATION (TSA) OR METALIZING Years of active experience with this Category: 3 Company Dates Details Details of training in this Category: Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.): Protherm Services 2001 to 2004 Supervised projects within the Exxon Mobil chemical plant and refinery. Applied this product to piping in the Protherm blast yard and field touch up after installation. Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Protherm Services 2001 to 2004 Monitored, performed and inspected surface preparation, preheating and application. List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): NACE #12/AWS C2.23M/SSPC-CS 23.00 List of purchasers and/or projects to which equipment in this Category was supplied: Exxon Mobil Oil and Chem. List of current qualifications and/or certifications applicable to this Category: NACE Certified Coatings Inspector, SSPC-C3 Competent Supervisor Certification, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE and SSPC List of prior qualifications and/or certifications applicable to this Category: Equipment Category: 6:03 FUSION BONDED EPOXY Years of active experience with this Category: 10 Company Dates Details Details of training in this Category: Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.): Echo construction, Performance Blasting and Coating 1990 to 2001 I have managed projects, inspected and performed repairs involving field touch up of fusion bonded epoxy. Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Echo construction, Performance Blasting and coating 1990 to 2001 Inspection involving high voltage holiday testing. List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): SSPC-SP2, SSPC-SP3,RPO188 List of purchasers and/or projects to which equipment in this Category was supplied: Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcore, Texaco, Motiva, Betz, Sun Oil, Onyx List of current qualifications and/or certifications applicable to this Category: NACE Certified Coatings Inspector, SSPC-C3 Competent Supervisor Certification, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE and SSPC List of prior qualifications and/or certifications applicable to this Category: Equipment Category: 6:02 COAL TAR EPOXY Years of active experience with this Category: 25 Company Dates Details Details of training in this Category: Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.): Plant Painting and Maintenance, Performance blasting and Coatings, Protherm Services. Meaux Services Inc. 1979 to 2004 Although coal tar epoxy has faded out in its value in the coatings industry due to its hazardous properties. I have managed, supervised, inspected, blasted off and applied this product to many water tanks, piping, flare stacks, barges, ships, general refinery and offshore equipment in the past. I have also set up, applied, supervised, managed and inspected a direct to earth secondary containment application utilizing a liquid CO2 injection as well as an injected non skid application (for concrete) with a modified coal tar epoxy. Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Plant painting and Maintenance Performance blasting, Protherm Services. Meaux Services Inc 1979 to 2004 Managed projects, supervised projects, and inspected projects, as well as performed surface preparation and application activities. List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): The following joint standards apply to the specifications of many projects that I have been involved with over the years relating to surface preparation associated with this product. SSPC-VIS 1, SSPC-VIS 3, SSPC-SP 1, SSPC-SP 2, SSPC-SP 3, SSPC-SP5, SSPC-SP6, SSPC-SP7, SSPC-SP10, SSPC-SP13, SSPC-SP14. In addition some of the following recommended practices have also been followed in association with this product as stated in the different specifications of the projects. ANSI Z117-Confined space safety procedures SSPC-PA1-Shop and field maintenance painting ASTM D4414-"Blotter test" for compressed air RPO287-Method for determining surface profile readings RPO181-Internal coatings ASTM D4414- Measurement of wet film thickness during application SSPC-PA2-Messurment of dry film thickness List of purchasers and/or projects to which equipment in this Category was supplied: Customers include: United States Oil Petroleum Reserve, Exxon, Exxon Mobil, Fina, BASF, Chevron, Premcore, Texaco, Motiva, Onyx, Diamond Offshore, Ensco, Noble, T.D.I.,. List of current qualifications and/or certifications applicable to this Category: NACE 1 Inspector, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE. List of prior qualifications and/or certifications applicable to this Category: Equipment Category: 6.05 EPOXY Years of active experience with this Category: 25 Company Dates Details Details of training in this Category: Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.): Performance blasting and Coatings, Protherm Services Tipco, Plant Painting and Maintenance. Meaux services inc. Applied Coatings Service. 1979 to 2004 I have managed, supervised, inspected, performed surface preparation and applied this product to many water tanks, piping, flare stacks, barges, ships, general refinery and offshore equipment in the past. Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Performance blasting and Coatings, Protherm Services Tipco, Plant Painting and Maintenance. Meaux services inc. Applied Coatings Service 1979 to 2004 Managed projects, supervised projects, and inspected projects, as well as performed surface preparation and application activities. List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): The following joint standards apply to the specifications of many projects that I have been involved with over the years relating to surface preparation associated with this product. SSPC-VIS 1, SSPC-VIS 3, SSPC-SP 1, SSPC-SP 2, SSPC-SP 3, SSPC-SP5, SSPC-SP6, SSPC-SP7, SSPC-SP8, SSPC-SP10, SSPC-SP11, SSPC-SP12 SSPC-SP13, SSPC-SP14. In addition some of the following recommended practices have also been followed in association with this product as stated in the different specifications of the projects. ANSI Z117-Confined space safety procedures SSPC-PA1-Shop and field maintenance painting ASTM D4414-"Blotter test" for compressed air RPO287-Method for determining surface profile readings RPO181-Internal coatings ASTM D4414- Measurement of wet film thickness during application SSPC-PA2-Messurment of dry film thickness RPO188-Holiday testing List of purchasers and/or projects to which equipment in this Category was supplied: Customers include: United States Oil Petroleum Reserve, Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcor, Texaco, Motiva, Sun Oil, Onyx, Diamond Offshore, Ensco, Noble, T.D.I., Signal,Conoco. Apache Production. List of current qualifications and/or certifications applicable to this Category: NACE 1 Coatings Inspector, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE. List of prior qualifications and/or certifications applicable to this Category: Equipment Category: 6:10 FIBERGLASS Years of active experience with this Category: 25 Company Dates Details Details of training in this Category: Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.):, Performance blasting and Coatings, Protherm Services. Tipco. Plant painting and Maintenance. 1979 to 2004 I have managed, supervised, inspected, performed surface preparation and applied this product to many water tanks, Oil storage tanks, and vessels. Reinforced fiber glass liners, chop and hand lay. Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Performance blasting and Coatings, Protherm Services. 1979 to 2004 Managed projects, supervised projects, and inspected projects, as well as performed surface preparation and application activities. List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): The following joint standards apply to the specifications of many projects that I have been involved with over the years relating to surface preparation associated with this product. SSPC-VIS 1, SSPC-VIS 3, SSPC-SP 1, SSPC-SP 3, SSPC-SP5, SSPC-SP11, SSPC-SP12. In addition some of the following recommended practices have also been followed in association with this product as stated in the different specifications of the projects. ANSI Z117-Confined space safety procedures SSPC-PA1-Shop and field maintenance painting ASTM D4414-"Blotter test" for compressed air RPO287-Method for determining surface profile readings RPO181-Internal coatings ASTM D4414- Measurement of wet film thickness during application SSPC-PA2-Messurment of dry film thickness RPO188-Holiday testing ASTM D 3363 Hardness test List of purchasers and/or projects to which equipment in this Category was supplied: Customers include: United States Oil Petroleum Reserve, Exxon, Exxon Mobil, Fina, BASF, Chevron, Premcore, Texaco, Motiva, Betz, Onyx,, Diamond Offshore, Ensco, Noble, T.D.I., Signal, List of current qualifications and/or certifications applicable to this Category: NACE 1 Coatings Inspector,, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE. List of prior qualifications and/or certifications applicable to this Category: View contact information... «« previous resume next resume »» Search Results (Resumes 101 to 150 of 1391)Go to Search Parameters... Brief Description 18 years experience in the petro-chemical and oilfield production industry as an Interprovincial Red Seal Journeyman Millwright, Millwright Supervisor and Maintenance Planner. Holding training certificates for H2S,CPR,WHMIS,Laser Alignment.Uphold an impeccable safety record. Bsc Chemistry Garduate, total 17 yrs progressive experience in petroleum Industries as Lab Technician, Chemist, Operator. Last 9 years working as a Marine Surveyor (Petroleum Inspector) at Kuwait. Can Run & set independent Lab for Petroleum Products. Liecenced driver with ISO Quality system knowhow Logistcs Coordinator maximo , CMMS , ITSM , ITAM Sales/Marketing business Development Manager with technical exposure and hands on in Well Testing, Down hole Testing and production facilities. Application for the post of WELDER Jr.Steamfitter Pipefitter, Construction Managment , Pipe Specification Mechanical Fitter with 33 years experience in heavy mechanical industry. City & guilds in mechanical engineering. Passed BOSIET (EUBOS) Recent UKOOA medical I am an experience automobiles mechanical /mechanic Forman .with more than 20 years of experience I am seeking an opportunity in automobiles industry I have a diploma in automobiles mechanic in petrol/diesel vehicles (light heavy vehicles ) I have work with different automobiles company as a wo Professional Heavy Duty Mechanic with leadeship and overseas experience seeks full-time or contract position with a well respected organization anywhere in the world. High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE. MILLWRIGHT With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance. Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore. Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I have strong organizational and people skills. I communicate well with the craft and customer, both written and verbally, I am also computer literate. I am seeking employment in the oil industry as a tradesman electrician in service, installation or repair. I have been an electrician for over 25 years and have gained experience in most aspects of the electrical trade. At present I run a small electrical contracting business. Applying Insulation and Sheet metal Cladding. Skills are; mechanic, HVAC, heavy equipment etc. Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work. Wellsite supervision -specializing in drilling supervision Mechanical Supervisor, offshore, FPSO experience. Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce. Sheet Metal /Insulation Supervisor Electrician with over ten years of experience Millwright/Safety i am d.p.singh, working as a operator in indian oil corporation ltd at panipat refinery, and having 12 years experiences. Senior directional drilling supervisor. I have extensive oilfield service experience in frac,cement and nitrogen operating in Prudhoe Bay,Alaska.Dewatering using both centrifuge and clarifier.I have been a frac supervisor and field coordinator.Just received mud engineering certificate. I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation. Onshore and offshore crane operator Extensive experience in the Electric Sumbersible Pump Industry Nace 1 Coatings Inspector 18 years of experience as a Senior Rotating Equipments Specialist. Specialized in the installation, commissioning, inspection, diagnosis, troubleshooting, refurbishment and maintenance of turbo machineries of major manufacturers used in Petroleum refineries, Petrochemical plants, Fertilizer complex I am seeking a long term employment contract within a company that would offer advancement, a good starting wage, and benefits. To secure a challenging position in the areas of Geographic Information system (GIS), Marine GIS, Remote Sensing (RS), Digital Photogrammetry, Nautical Charting, Electronic Navigational Charts (ENCs), Digital Cartography or Geophysics 1 Six years of marketing experience specializing in petroleum products (industrial and automotive fuels and lubricants). 2 Over twelve years of mining industry experience, eight of which as Senior Geologist. Four years of project management. Senior Civil / Structural Designer quality control / quality assurance 10 yrs experience in heavy equipment mechanic and a previous mechanic in an oil company To utilize my broad skills and experience in offshore and onshore oil and gas installation for process control instrumentation and electrical maintenance. Objective Employment with a company desirous of a dedicated, hard working, creative, team player, offering 25 years of experience in the Instrumentation field. Resume for employment The computer skills I have apply primarily to Landmark (Unix, SunSolaris, Oracle) and Kingdom (SMT) seismic workstations. I am proficient with most PC applications as well. My work history is stable and I have good references. Seeking a position as a driller where my experience, training, loyalty and good work habits will be an asset to your company. I have over 27 years of oilfield experience offshore and on land with expertise in the following: supervision, operations, trouble shooting, safety and derricks. Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins Electrical tech. / electrician / API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator Crane operator/ outside machinist I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal. 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Seach Parameters Change search parameters... CATEGORIES: Trades/Skilled;INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer)Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions... Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out ©1999-2008 Misco Jobs. All rights reserved. Contact: support@miscojobs.com разделы изготовление пленка 5440.16 (крышка) биоэпиляция головка винторезный узи тошиба краска ржавчина электрокотел луковичный цвет тонировка холодильный агрегат macintosh клеить 88 люкс кассовый машина мультиметры цифровой рассылка лечение щитовидный железа 5440.16 (крышка) долг светящийся краска многотарифные электросчетчик слим лифт доставка хим. реагент операторский центр бахила оптом переработка резина сбор д/полоскания горло зубной боль пежо 5440.14 (крышка) нестандартный коробка пежо 307 информационный валаам пазл угловой тестомесители kyiv apartments service dhl диспетчеризация электрокамин dimplex model plasma (sp9) брэнд органический растворитель снегоуборочный машина вакансия красноярск велюкс билет russia music awards man гильза конвейер шнековый билет ммдм кадровый владимир управление архангельск сборный доставка корпоративный обслуживание купить яйцеварку миканитовые втулка организация похорон кострома жилье бак накопитель аденома устройство плавный пуск мрт коленный сустав эдас-934 аденома предст.ж-зы гипсокартон измеритель петля фаза нуль папиллома трубогиб дорном вызов врач ваза 21102 ваза 2113 кружка тестоделитель адресный база данный холодильник уценка зона ограничение доступ надевание бахила эфирный антенна рассылка адрес светоотражающий краска силуэт слимент лифт автоматический отправка писем outlook слюдопластовые втулка варочный поверхность cata шампанский заказ система видеоконференция электрический прочность сенсорный экран индивидуальный банковский ячейка детский лагерь пионер купить минимойку snr кофе колониальный товар рукавичка доставка нейминг protherm